Simulation of the Adhesion of Particles to Surfaces

The removal of micrometer and submicrometer particles from dielectric and metal films represents a challenge in postchemical mechanical polishing cleaning. Proper modeling of the adhesive force between contaminant particles and these films is needed to develop optimal solutions to postchemical mechanical polishing cleaning. We have previously developed and experimentally validated a model to describe the adhesion between spherical particles and thin films. This simulation expands previous models to characterize the adhesive interaction between asymmetrical particles, characteristic of a polishing slurry, and various films. Our simulation accounts for the contact area between particles and substrates, as well as the morphology of the surfaces. Previous models fail to accurately describe the contact of asymmetrical particles interacting with surfaces. By properly accounting for nonideal and geometry and morphology, the simulation predicts a more accurate adhesive force than predictions based upon an ideal van der Waals model. The simulation is compared to experimental data taken for both semi-ideal particle-substrate systems (polystyrene latex spheres in contact with silicon films) and asymmetrical systems (alumina particles in contact with various films). Copyright 2001 Academic Press.     

Stereoselective synthesis of the ABCD ring framework of azaspiracids

A stereoselective synthesis of the ABCD ring framework of azaspiracid-1 and azaspiracid-3 has been achieved using a tandem bis-spiroketalization protocol in the presence of a mild proton source from 1,4-diketone precursor. A tetrahydrofuran intermediate with the correct stereochemistry for the D ring of azaspiracids-1 and 3 was then taken through a linear sequence of reactions to afford the desired diketone precursor. The D-ring of azaspiracid-1 was then constructed by employing a Sharpless asymmetric dihydroxylation followed by etherification using a homoallyl derivative. The structure of the ABCD ring framework with four contiguous rings was established by extensive NMR analysis.     

Photophysical studies on binding of curcumin to bovine serum albumins

The excited-state photophysical properties of curcumin in the presence of bovine serum albumin (BSA) have been studied. The absorption and fluorescence changes in curcumin on binding to BSA have been followed at varying concentrations of either curcumin or BSA to determine the binding constant, which has been found to be approximately 10(4) to 10(5) M(-1). Stopped-flow kinetics studies suggested at least two distinct kinetic steps for the binding of curcumin to BSA. The photophysical properties of the singlet-excited state of the curcumin-BSA complex have also been studied. Whereas the absorption spectrum of curcumin is redshifted, the fluorescence spectrum of curcumin was blueshifted in the presence of BSA. The fluorescence quantum yield of curcumin on complexing with BSA was approximately 0.05. Steady-state fluorescence anisotropy studies showed a significant increase in the anisotropy value of 0.37 in BSA-bound curcumin. The fluorescence decay of the curcumin-BSA complex followed a biexponential decay with fluorescence lifetimes of 413 ps (33%) and 120 ps (67%). On the basis of these complementary results, it has been concluded that curcumin shows very high binding to BSA, probably at the hydrophobic cavities inside the protein.     

Polarographic separation of cobalt from nickel

Summary The polarographic behaviour of nickel and cobalt in the mixed base electrolytes, urea-pyridine and urea-hydrazine has been studied. The effect of p_H, concentration of supporting electrolyte and the presence of various other ions was investigated. Well defined polarograms for both the elements were obtained at p_H 6.0 and 5.0 respectively. Attempts were made to utilize these observations in the separation of the two cations. While the difference in E _1/2 of the ions in urea-pyridine was greater than –0.3 volts that in urea-hydrazine was about –0.2 volts or slightly less even under the optimum conditions. In a mixed solution the waves for Co and Ni were therefore well developed and separated in the former base electrolyte. The polarograms in urea-hydrazine were, however, of little analytical use because of the washing away of the Ni wave due to the presence of even small amounts of cobalt.

---

Zusammenfassung Das polarographische Verhalten von Nickel und Kobalt in Harnstoff-Pyridin- und Harnstoff-Hydrazinlösung wurde untersucht und der Einfluß des p_H-Wertes, der Leitsalzkonzentration sowie der Gegenwart verschiedener anderer Ionen festgestellt. Bei p_H 6,0 bzw. 5,0 wurden für beide Elemente gut ausgebildete Polarogramme erhalten. Es wurde versucht, die erhaltenen Ergebnisse zur Trennung der beiden Ionen zu benutzen. In Harnstoff-Pyridinlösung beträgt der Unterschied der beiden Halbstufenpotentiale mehr als –0,3 V und man erhält gut ausgebildete und voneinander getrennte Stufen. In Harnstoff-Hydrazinlösung dagegen beträgt der Unterschied nur –0,2 V oder etwas weniger, selbst unter optimaler Bedingungen, und die Ni-Stufe wird schon durch kleine Kobaltmengen beeinträchtigt.

     

Spectrophotometric determination of copper after adsorption of its 1-phenyl-4,4,6-trimethyl(1H, 4H)-pyrimidine-2-thiol complex onto microcrystalline naphthalene

A selective Spectrophotometric method has been developed for the trace determination of copper after adsorption of its 1-phenyl-4,4,6-trimethyl(1H, 4H)-pyrimidine-2-thiol (PTPT) complex onto microcrystalline naphthalene. The complex is quantitatively adsorbed on naphthalene in the pH range 7.5–11.5, separated by filtration, dissolved in dimethylformamide (DMF) and determined spectrophotometrically at 400 nm. Beer's law is obeyed in the concentration range 2.5–37.5 g of copper in 10 ml of DMF. The molar absorptivity and Sandell's sensitivity are 1.30 × 10⁴1 · mol^–1 · cm^–1 and 0.0048g cm^–2, respectively. Ten replicate analyses of a solution containing 20.0 g of copper gave a mean absorbance of 0.410 with a relative standard deviation of 0.91 %. The interferences of various ions have been studied and the method has been validated by the determination of copper in various standard reference materials, beers, wines, human hair, goat liver and environmental samples.On leave from St. Stephen's College, Delhi 110 007, India     

Templated ceramic microstructures by using the breath-figure method

We describe the synthesis of two cyclobutadiene(cyclopentadienyl)cobalt-containing poly(p-phenylene ethynylene)s (PPEs) and their use as precursors for stable ceramic surface coatings. Organometallic PPEs were shaped into hexagonally ordered assemblies by using the breath-figure method. Such breath figures can be washed away with an appropriate solvent. Upon pyrolysis at 500 degrees C under either nitrogen or air, the bubble arrays persist as ceramics and are insoluble in organic solvents or water. The formed pyrolyzed bubble arrays were analyzed by optical and scanning electron microscopy, as well as energy dispersive X-ray microanalysis (EDX). The composition of the ceramic materials is discussed based on EDX and IR data.     

Kinetics of polymerization of acrylonitrile initiated by the Mn3+-thioacetamide redox system

Kinetics of the polymerization of acrylonitrile has been investigated in aqueous sulfuric acid in a temperature range of 25–45°C. The rate of polymerization (R_p) and the rate of managanic ion disappearance, etc., have been measured. The effect of the various additives, such as water-miscible organic solvents, neutral electrolytes, complexing agents, and surfactants, on the rate has been thoroughly studied. A mechanism that involves the initial complex formation between the thiol form of the thioamide and Mn³⁺, whose decomposition yields the initiating free radical with the polymer chain terminated by mutual combination of growing radicals, has been suggested.     

Capturing a metastable chiral polymorph of an achiral molecule--hexa-O-benzoyl-myo-inositol

myo-Inositol hexabenzoate having meso configuration produces chiral polymorph (form I) when crystallized rapidly but yields achiral polymorph (form II) when allowed to crystallize slowly; in the mother liquor form I slowly but completely disappears to give form II.